West U Marble Company, LLC


Vanity Tops

Cultured Marble Vanity tops ( Hi-Lo setup ).  Notice the continuing backsplash across the entire length of the top.

Cultured marble vanity tops are an excellent way to spice up any bathroom decor. Manufactured with great attention to detail, each vanity top is individually cast using the finest molds and materials available. All exposed surfaces are uniformly coated with a minimum of 13 mils of ultra-violet stabilized gel coat. Pigments used in the colorization of our products are permanent and non-fading. Upon completion of the casting, we hand finish each piece. It is at this stage that we sand and polish all exposed surfaces, grind the underside and drain surfaces, and carefully inspect the casting to insure that it be free of any void, crack, air bubble, blister, chipped area, specks or pits.

Our One Year Manufacturers Warranty insures that upon installation or delivery, our vanity tops will be free of the above mentioned flaws. In addition to this, we further warranty that our lavatories will themal cycle effectively. This is to say that they will withstand the thermal shock of hot to cold without cracking or discoloring.

wpe29.jpg (11722 bytes)

Vanity top with a KohlerŽ Caxton (K-2210) undermount lavatory

wpe1.jpg (8235 bytes)

Wet Bar with Drop-in Stainless Steel Sink

wpe35.jpg (3768 bytes)

Some of the many shapes we can fabricate

Backsplash Stlyes

Vanity tops with separate backsplashes are standard. The standard backsplash height is 4", but can be made to accommodate virtually any height. 

Separate Backsplash


wpe34.jpg (4053 bytes)

Separate Backsplash 4" high ( Standard )



Hit Counter